How to use the teaser.logic.buildingobjects.buildingphysics.layer.Layer function in teaser

material_owe1.name = "Plasterboard"
    material_owe1.density = 950.0
    material_owe1.heat_capac = 840.0 / 1000
    material_owe1.thermal_conduc = 0.16
    material_owe1.ir_emissivity = 0.9

    layer_owe2 = Layer(parent=out_wall_east, id=1)
    layer_owe2.thickness = 0.066

    material_owe2 = Material(layer_owe2)
    material_owe2.name = "Fiberglass"
    material_owe2.density = 12
    material_owe2.heat_capac = 840 / 1000
    material_owe2.thermal_conduc = 0.04

    layer_owe3 = Layer(parent=out_wall_east, id=2)
    layer_owe3.thickness = 0.009

    material_owe3 = Material(layer_owe3)
    material_owe3.name = "WoodSiding"
    material_owe3.density = 530
    material_owe3.heat_capac = 900 / 1000
    material_owe3.thermal_conduc = 0.14
    material_owe3.solar_absorp = 0.6
    material_owe3.ir_emissivity = 0.9

    out_wall_south = OuterWall(parent=tz)
    out_wall_south.name = "OuterWallSouth"
    out_wall_south.area = (8.0 * 2.7)
    out_wall_south.orientation = 180.0
    out_wall_south.tilt = 90.0
    out_wall_south.inner_convection = 3.16

material_oww3.name = "WoodSiding"
    material_oww3.density = 530
    material_oww3.heat_capac = 900 / 1000
    material_oww3.thermal_conduc = 0.14
    material_oww3.solar_absorp = 0.6
    material_oww3.ir_emissivity = 0.9

    in_wall_floor = Floor(parent=tz)
    in_wall_floor.name = "InnerWallFloor"
    in_wall_floor.area = 6 * 8
    in_wall_floor.orientation = -2.0
    in_wall_floor.tilt = 0.0
    in_wall_floor.inner_convection = 4.13
    in_wall_floor.inner_radiation = 5.13

    layer_iwf1 = Layer(parent=in_wall_floor, id=0)
    layer_iwf1.thickness = 0.025

    material_iwf1 = Material(layer_iwf1)
    material_iwf1.name = "TimberFlooring"
    material_iwf1.density = 650
    material_iwf1.heat_capac = 1200 / 1000
    material_iwf1.thermal_conduc = 0.14
    material_iwf1.ir_emissivity = 0.9

    layer_iwf2 = Layer(parent=in_wall_floor, id=1)
    layer_iwf2.thickness = 1.003

    material_iwf2 = Material(layer_iwf2)
    material_iwf2.name = "Insulation"
    material_iwf2.density = 0.000000000001  # 0.0001, as small as possible
    material_iwf2.heat_capac = 0.000000000001  # 0.0001, as small as possible

material_ows3.heat_capac = 900 / 1000
    material_ows3.thermal_conduc = 0.14
    material_ows3.solar_absorp = 0.6
    material_ows3.ir_emissivity = 0.9

    out_wall_west = OuterWall(parent=tz)
    out_wall_west.name = "OuterWallWest"
    out_wall_west.area = 6 * 2.7 - 3.0 * 2.0  # minus one window
    out_wall_west.orientation = 270.0
    out_wall_west.tilt = 90.0
    out_wall_west.inner_convection = 3.16
    out_wall_west.outer_convection = 24.67
    out_wall_west.inner_radiation = 5.13
    out_wall_west.outer_radiation = 4.63

    layer_oww1 = Layer(parent=out_wall_west, id=0)
    layer_oww1.thickness = 0.1

    material_oww1 = Material(layer_oww1)
    material_oww1.name = "Concrete"
    material_oww1.density = 1400.0
    material_oww1.heat_capac = 1000.0 / 1000
    material_oww1.thermal_conduc = 0.51
    material_oww1.ir_emissivity = 0.9

    layer_oww2 = Layer(parent=out_wall_west, id=1)
    layer_oww2.thickness = 0.062

    material_oww2 = Material(layer_oww2)
    material_oww2.name = "FoamInsulation"
    material_oww2.density = 10
    material_oww2.heat_capac = 1400 / 1000

material_own3.heat_capac = 900 / 1000
    material_own3.thermal_conduc = 0.14
    material_own3.solar_absorp = 0.6
    material_own3.ir_emissivity = 0.9

    out_wall_east = OuterWall(parent=tz)
    out_wall_east.name = "OuterWallEast"
    out_wall_east.area = 6.0 * 2.7
    out_wall_east.orientation = 90.0
    out_wall_east.tilt = 90.0
    out_wall_east.inner_convection = 3.16
    out_wall_east.outer_convection = 24.67
    out_wall_east.inner_radiation = 5.13
    out_wall_east.outer_radiation = 4.63

    layer_owe1 = Layer(parent=out_wall_east, id=0)
    layer_owe1.thickness = 0.012

    material_owe1 = Material(layer_owe1)
    material_owe1.name = "Plasterboard"
    material_owe1.density = 950.0
    material_owe1.heat_capac = 840.0 / 1000
    material_owe1.thermal_conduc = 0.16
    material_owe1.ir_emissivity = 0.9

    layer_owe2 = Layer(parent=out_wall_east, id=1)
    layer_owe2.thickness = 0.066

    material_owe2 = Material(layer_owe2)
    material_owe2.name = "Fiberglass"
    material_owe2.density = 12
    material_owe2.heat_capac = 840 / 1000

in_wall_floor.orientation = -2.0
    in_wall_floor.tilt = 0.0
    in_wall_floor.inner_convection = 4.13
    in_wall_floor.inner_radiation = 5.13

    layer_iwf1 = Layer(parent=in_wall_floor, id=0)
    layer_iwf1.thickness = 0.08

    material_iwf1 = Material(layer_iwf1)
    material_iwf1.name = "Concrete"
    material_iwf1.density = 1400
    material_iwf1.heat_capac = 1000 / 1000
    material_iwf1.thermal_conduc = 1.13
    material_iwf1.ir_emissivity = 0.9

    layer_iwf2 = Layer(parent=in_wall_floor, id=1)
    layer_iwf2.thickness = 1.007

    material_iwf2 = Material(layer_iwf2)
    material_iwf2.name = "Insulation"
    material_iwf2.density = 0.000000000001  # 0.0001, as small as possible
    material_iwf2.heat_capac = 0.000000000001  # 0.0001, as small as possible
    material_iwf2.thermal_conduc = 0.04

    win_1 = Window(parent=tz)
    win_1.name = "WindowWest"
    win_1.area = 3 * 2
    win_1.tilt = 90.0
    win_1.orientation = 270.0
    win_1.inner_convection = 3.16
    win_1.inner_radiation = 5.13
    win_1.outer_convection = 16.37

material_owe3.heat_capac = 900 / 1000
    material_owe3.thermal_conduc = 0.14
    material_owe3.solar_absorp = 0.6
    material_owe3.ir_emissivity = 0.9

    out_wall_south = OuterWall(parent=tz)
    out_wall_south.name = "OuterWallSouth"
    out_wall_south.area = (8.0 * 2.7)
    out_wall_south.orientation = 180.0
    out_wall_south.tilt = 90.0
    out_wall_south.inner_convection = 3.16
    out_wall_south.outer_convection = 24.67
    out_wall_south.inner_radiation = 5.13
    out_wall_south.outer_radiation = 4.63

    layer_ows1 = Layer(parent=out_wall_south, id=0)
    layer_ows1.thickness = 0.012

    material_ows1 = Material(layer_ows1)
    material_ows1.name = "Plasterboard"
    material_ows1.density = 950.0
    material_ows1.heat_capac = 840.0 / 1000
    material_ows1.thermal_conduc = 0.16
    material_ows1.ir_emissivity = 0.9

    layer_ows2 = Layer(parent=out_wall_south, id=1)
    layer_ows2.thickness = 0.066

    material_ows2 = Material(layer_ows2)
    material_ows2.name = "Fiberglass"
    material_ows2.density = 12
    material_ows2.heat_capac = 840 / 1000

win_2_material.ir_emissivity = 0.9

    #  This is a dummy ground floor to export three and four elements models.
    #  Please set values for floor plate in three element and four element
    #  models to default.

    if number_of_elements >= 3:
        out_wall_gf = GroundFloor(parent=tz)
        out_wall_gf.name = "ExtWallGroundFloor"
        out_wall_gf.area = 6 * 8
        out_wall_gf.orientation = -2.0
        out_wall_gf.tilt = 0.0
        out_wall_gf.inner_convection = 4.13
        out_wall_gf.inner_radiation = 5.13

        layer_ofgw1 = Layer(parent=out_wall_gf, id=0)
        layer_ofgw1.thickness = 1.003

        material_ofgw1 = Material(layer_ofgw1)
        material_ofgw1.name = "Insulation"
        material_ofgw1.density = 0.0001  # as small as possible
        material_ofgw1.heat_capac = 0.0001  # as small as possible
        material_ofgw1.thermal_conduc = 0.04

    if save:
        prj.save_project(file_name='ASHRAE140_900', path=path)

    return prj

win_1_material.transmittance = 0.907
    win_1_material.ir_emissivity = 0.9

    win_2 = Window(parent=tz)
    win_2.name = "WindowSouthRight"
    win_2.area = 3 * 2
    win_2.tilt = 90.0
    win_2.orientation = 180.0
    win_2.inner_convection = 3.16
    win_2.inner_radiation = 5.13
    win_2.outer_convection = 16.37
    win_2.outer_radiation = 4.63
    win_2.g_value = 0.789
    win_2.a_conv = 0.03  # for the given U-value extracted from VDI 6007-2/-3

    win_2_layer = Layer(parent=win_2)
    win_2_layer.id = 1
    win_2_layer.thickness = 0.024

    win_2_material = Material(win_2_layer)
    win_2_material.name = "GlasWindow"
    win_2_material.thermal_conduc = 0.15
    win_2_material.transmittance = 0.907
    win_2_material.ir_emissivity = 0.9

    #  This is a dummy ground floor to export three and four elements models.
    #  Please set values for floor plate in three element and four element
    #  models to default.

    if number_of_elements >= 3:
        out_wall_gf = GroundFloor(parent=tz)
        out_wall_gf.name = "ExtWallGroundFloor"

material_own1.name = "Concrete"
    material_own1.density = 1400.0
    material_own1.heat_capac = 1000 / 1000
    material_own1.thermal_conduc = 0.51
    material_own1.ir_emissivity = 0.9

    layer_own2 = Layer(parent=out_wall_north, id=1)
    layer_own2.thickness = 0.062

    material_own2 = Material(layer_own2)
    material_own2.name = "FoamInsulation"
    material_own2.density = 10
    material_own2.heat_capac = 1400 / 1000
    material_own2.thermal_conduc = 0.04

    layer_own3 = Layer(parent=out_wall_north, id=2)
    layer_own3.thickness = 0.009

    material_own3 = Material(layer_own3)
    material_own3.name = "WoodSiding"
    material_own3.density = 530
    material_own3.heat_capac = 900 / 1000
    material_own3.thermal_conduc = 0.14
    material_own3.solar_absorp = 0.6
    material_own3.ir_emissivity = 0.9

    out_wall_east = OuterWall(parent=tz)
    out_wall_east.name = "OuterWallEast"
    out_wall_east.area = 6.0 * 2.7
    out_wall_east.orientation = 90.0
    out_wall_east.tilt = 90.0
    out_wall_east.inner_convection = 3.16

out_wall_west.inner_convection = 3.16
    out_wall_west.outer_convection = 24.67
    out_wall_west.inner_radiation = 5.13
    out_wall_west.outer_radiation = 4.63

    layer_oww1 = Layer(parent=out_wall_west, id=0)
    layer_oww1.thickness = 0.012

    material_oww1 = Material(layer_oww1)
    material_oww1.name = "Plasterboard"
    material_oww1.density = 950.0
    material_oww1.heat_capac = 840.0 / 1000
    material_oww1.thermal_conduc = 0.16
    material_oww1.ir_emissivity = 0.9

    layer_oww2 = Layer(parent=out_wall_west, id=1)
    layer_oww2.thickness = 0.066

    material_oww2 = Material(layer_oww2)
    material_oww2.name = "Fiberglass"
    material_oww2.density = 12
    material_oww2.heat_capac = 840 / 1000
    material_oww2.thermal_conduc = 0.04

    layer_oww3 = Layer(parent=out_wall_west, id=2)
    layer_oww3.thickness = 0.009

    material_oww3 = Material(layer_oww3)
    material_oww3.name = "WoodSiding"
    material_oww3.density = 530
    material_oww3.heat_capac = 900 / 1000
    material_oww3.thermal_conduc = 0.14