Async Scylla driver for python

Python driver for ScyllaDB written in Rust. Though description says it's for scylla, however it can be used with Cassandra and AWS keyspaces as well.

This driver uses official ScyllaDB driver for Rust and exposes python API to interact with it.

Installation

To install it, use your favorite package manager for python packages:

pip install scyllapy

Also, you can build from sources. To do it, install stable rust, maturin and openssl libs.

maturin build --release --out dist
# Then install whl file from dist folder.
pip install dist/*

Usage

The usage is pretty straitforward. Create a Scylla instance, run startup and start executing queries.

import asyncio

from scyllapy import Scylla


async def main():
    scylla = Scylla(["localhost:9042"], keyspace="keyspace")
    await scylla.startup()
    await scylla.execute("SELECT * FROM table")
    await scylla.shutdown()

if __name__ == "__main__":
    asyncio.run(main())

Parametrizing queries

While executing queries sometimes you may want to fine-tune some parameters, or dynamically pass values to the query.

Passing parameters is simple. You need to add a paramters list to the query.

    await scylla.execute(
        "INSERT INTO otps(id, otp) VALUES (?, ?)",
        [uuid.uuid4(), uuid.uuid4().hex],
    )

Queries can be modified further by using Query class. It allows you to define consistency for query or enable tracing.

from scyllapy import Scylla, Query, Consistency, SerialConsistency

async def make_query(scylla: Scylla) -> None:
    query = Query(
        "SELECT * FROM table",
        consistency=Consistency.ALL,
        serial_consistency=SerialConsistency.LOCAL_SERIAL,
        request_timeout=1,
        timestamp=int(time.time()),
        is_idempotent=False,
        tracing=True,
    )
    result = await scylla.execute(query)
    print(result.all())

Also, with queries you can tweak random parameters for a specific execution.

query = Query("SELECT * FROM table")

new_query = query.with_consistency(Consistency.ALL)

All with_ methods create new query, copying all other parameters.

Here's the list of scylla types and corresponding python types that you should use while passing parameters to queries:

All types from extra_types module are used to eliminate any possible ambiguity while passing parameters to queries. You can find more information about them in Extra types section.

We use relative delta from dateutil for duration, because it's the only way to represent it in python. Since scylla operates with months, days and nanosecond, there's no way we can represent it in python, becuase months are variable length.

Named parameters

Also, you can provide named parameters to querties, by using name placeholders instead of ?.

For example:

async def insert(scylla: Scylla):
    await scylla.execute(
        "INSERT INTO table(id, name) VALUES (:id, :name)",
        params={"id": uuid.uuid4(), "name": uuid.uuid4().hex}
    )

Important note: All variables should be in snake_case. Otherwise the error may be raised or parameter may not be placed in query correctly. This happens, because scylla makes all parameters in query lowercase.

The scyllapy makes all parameters lowercase, but you may run into problems, if you use multiple parameters that differ only in cases of some letters.

Preparing queries

Also, queries can be prepared. You can either prepare raw strings, or Query objects.

from scyllapy import Scylla, Query, PreparedQuery


async def prepare(scylla: Scylla, query: str | Query) -> PreparedQuery:
    return await scylla.prepare(query)

You can execute prepared queries by passing them to execute method.

async def run_prepared(scylla: Scylla) -> None:
    prepared = await scylla.prepare("INSERT INTO memse(title) VALUES (?)")
    await scylla.execute(prepared, ("American joke",))

Batching

We support batches. Batching can help a lot when you have lots of queries that you want to execute at the same time.

from scyllapy import Scylla, Batch


async def run_batch(scylla: Scylla, num_queries: int) -> None:
    batch = Batch()
    for _ in range(num_queries):
        batch.add_query("SELECT * FROM table WHERE id = ?")
    await scylla.batch(batch, [(i,) for i in range(num_queries)])

Here we pass query as strings. But you can also add Prepared statements or Query objects.

Also, note that we pass list of lists as parametes for execute. Each element of the list is going to be used in the query with the same index. But named parameters are not supported for batches.

async def run_batch(scylla: Scylla, num_queries: int) -> None:
    batch = Batch()
    batch.add_query("SELECT * FROM table WHERE id = :id")
    await scylla.batch(batch, [{"id": 1}])  # Will rase an error!

Pagination

Sometimes you want to query lots of data. For such cases it's better not to fetch all results at once, but fetch them using pagination. It reduces load not only on your application, but also on a cluster.

To execute query with pagination, simply add paged=True in execute method. After doing so, execute method will return IterableQueryResult, instead of QueryResult. Instances of IterableQueryResult can be iterated with async for statements. You, as a client, won't see any information about pages, it's all handeled internally within a driver.

Please note, that paginated queries are slower to fetch all rows, but much more memory efficent for large datasets.

    result = await scylla.execute("SELECT * FROM table", paged=True)
    async for row in result:
        print(row)

Of course, you can change how results returned to you, by either using scalars or as_cls. For example:

async def func(scylla: Scylla) -> None:
    rows = await scylla.execute("SELECT id FROM table", paged=True)
    # Will print ids of each returned row.
    async for test_id in rows.scalars():
        print(test_id)

from dataclasses import dataclass

@dataclass
class MyDTO:
    id: int
    val: int

async def func(scylla: Scylla) -> None:
    rows = await scylla.execute("SELECT * FROM table", paged=True)
    # Will print ids of each returned row.
    async for my_dto in rows.as_cls(MyDTO):
        print(my_dto.id, my_dto.val)

Execution profiles

You can define profiles using ExecutionProfile class. After that the profile can be used while creating a cluster or when defining queries.

from scyllapy import Consistency, ExecutionProfile, Query, Scylla, SerialConsistency
from scyllapy.load_balancing import LoadBalancingPolicy, LatencyAwareness

default_profile = ExecutionProfile(
    consistency=Consistency.LOCAL_QUORUM,
    serial_consistency=SerialConsistency.LOCAL_SERIAL,
    request_timeout=2,
)

async def main():
    query_profile = ExecutionProfile(
        consistency=Consistency.ALL,
        serial_consistency=SerialConsistency.SERIAL,
        # Load balancing cannot be constructed without running event loop.
        # If you won't do it inside async funcion, it will result in error.
        load_balancing_policy=await LoadBalancingPolicy.build(
            token_aware=True,
            prefer_rack="rack1",
            prefer_datacenter="dc1",
            permit_dc_failover=True,
            shuffling_replicas=True,
            latency_awareness=LatencyAwareness(
                minimum_measurements=10,
                retry_period=1000,
                exclusion_threshold=1.4,
                update_rate=1000,
                scale=2,
            ),
        ),
    )

    scylla = Scylla(
        ["192.168.32.4"],
        default_execution_profile=default_profile,
    )
    await scylla.startup()
    await scylla.execute(
        Query(
            "SELECT * FROM system_schema.keyspaces;",
            profile=query_profile,
        )
    )

Results

Every query returns a class that represents returned rows. It allows you to not fetch and parse actual data if you don't need it. Please be aware that if your query was not expecting any rows in return. Like for Update or Insert queries. The RuntimeError is raised when you call all or first.

result = await scylla.execute("SELECT * FROM table")
print(result.all())

If you were executing query with tracing, you can get tracing id from results.

result = await scylla.execute(Query("SELECT * FROM table", tracing=True))
print(result.trace_id)

Also it's possible to parse your data using custom classes. You can use dataclasses or Pydantic.

from dataclasses import dataclass

@dataclass
class MyDTO:
    id: uuid.UUID
    name: str

result = await scylla.execute("SELECT * FROM inbox")
print(result.all(as_class=MyDTO))

Or with pydantic.

from pydantic import BaseModel

class MyDTO(BaseModel):
    user_id: uuid.UUID
    chat_id: uuid.UUID

result = await scylla.execute("SELECT * FROM inbox")
print(result.all(as_class=MyDTO))

Extra types

Since Rust enforces typing, it's hard to identify which value user tries to pass as a parameter. For example, 1 that comes from python can be either tinyint, smallint or even bigint. But we cannot say for sure how many bytes should we send to server. That's why we created some extra_types to eliminate any possible ambigousnity.

You can find these types in extra_types module from scyllapy.

from scyllapy import Scylla, extra_types

async def execute(scylla: Scylla) -> None:
    await scylla.execute(
        "INSERT INTO table(id, name) VALUES (?, ?)",
        [extra_types.BigInt(1), "memelord"],
    )

User defined types

We also support user defined types. You can pass them as a parameter to query. Or parse it as a model in response.

Here's binding example. Imagine we have defined a type in scylla like this:

CREATE TYPE IF NOT EXISTS test (
    id int,
    name text
);

Now we need to define a model for it in python.

from dataclasses import dataclass
from scyllapy.extra_types import ScyllaPyUDT

@dataclass
class TestUDT(ScyllaPyUDT):
    # Always define fields in the same order as in scylla.
    # Otherwise you will get an error, or wrong data.
    id: int
    name: str

async def execute(scylla: Scylla) -> None:
    await scylla.execute(
        "INSERT INTO table(id, udt_col) VALUES (?, ?)",
        [1, TestUDT(id=1, name="test")],
    )

We also support pydantic based models. Decalre them like this:

from pydantic import BaseModel
from scyllapy.extra_types import ScyllaPyUDT


class TestUDT(BaseModel, ScyllaPyUDT):
    # Always define fields in the same order as in scylla.
    # Otherwise you will get an error, or wrong data.
    id: int
    name: str

Query building

ScyllaPy gives you ability to build queries, instead of working with raw cql. The main advantage that it's harder to make syntax error, while creating queries.

Base classes for Query building can be found in scyllapy.query_builder.

Usage example:

from scyllapy import Scylla
from scyllapy.query_builder import Insert, Select, Update, Delete


async def main(scylla: Scylla):
    await scylla.execute("CREATE TABLE users(id INT PRIMARY KEY, name TEXT)")

    user_id = 1

    # We create a user with id and name.
    await Insert("users").set("id", user_id).set(
        "name", "user"
    ).if_not_exists().execute(scylla)

    # We update it's name to be user2
    await Update("users").set("name", "user2").where("id = ?", [user_id]).execute(
        scylla
    )

    # We select all users with id = user_id;
    res = await Select("users").where("id = ?", [user_id]).execute(scylla)
    # Verify that it's correct.
    assert res.first() == {"id": 1, "name": "user2"}

    # We delete our user.
    await Delete("users").where("id = ?", [user_id]).if_exists().execute(scylla)

    res = await Select("users").where("id = ?", [user_id]).execute(scylla)

    # Verify that user is deleted.
    assert not res.all()

    await scylla.execute("DROP TABLE users")

Also, you can pass built queries into InlineBatches. You cannot use queries built with query_builder module with default batches. This constraint is exists, because we need to use values from within your queries and should ignore all parameters passed in batch method of scylla.

Here's batch usage example.

from scyllapy import Scylla, InlineBatch
from scyllapy.query_builder import Insert


async def execute_batch(scylla: Scylla) -> None:
    batch = InlineBatch()
    for i in range(10):
        Insert("users").set("id", i).set("name", "test").add_to_batch(batch)
    await scylla.batch(batch)

Paging

Queries that were built with QueryBuilder also support paged returns. But it supported only for select, because update, delete and insert should not return anything and it makes no sense implementing it. To make built Select query return paginated iterator, add paged parameter in execute method.

    rows = await Select("test").execute(scylla, paged=True)
    async for row in rows:
        print(row['id'])