How to use the ciscoconfparse.ciscoconfparse.CiscoConfParse function in ciscoconfparse

def testVal_IOSRouteLine_10():
    line = 'ipv6 route ::/0 2001:DEAD:BEEF::1'
    cfg = CiscoConfParse([line], factory=True)
    obj = cfg.ConfigObjs[0]
    assert 'ipv6'==obj.address_family
    assert ''==obj.vrf
    assert '::'==obj.network
    assert '::'==obj.netmask
    assert 0==obj.masklen
    assert ''==obj.next_hop_interface
    assert '2001:DEAD:BEEF::1'==obj.next_hop_addr
    assert obj.multicast is False
    #assert ''==obj.tracking_object_name
    #assert ''==obj.route_name
    #assert obj.permanent is False
    #assert obj.global_next_hop is True    # All non-vrf routes have global NHs
    assert 1==obj.admin_distance
    assert ''==obj.tag

def testVal_IOSAaaCommandsAuthorizationLine():
    line = 'aaa authorization commands 15 default group tacacs+ local'
    cfg = CiscoConfParse([line], factory=True)
    obj = cfg.ConfigObjs[0]

    assert 15==obj.level
    assert 'tacacs+'==obj.group
    assert 'default'==obj.list_name
    assert ['local']==obj.methods

def testVal_IOSIntfLine_portchannel_number_01():
    lines = ['!',
        'interface GigabitEthernet 1/1',
        ' switchport mode trunk',
        ' switchport trunk native vlan 911',
        ' channel-group 25 mode active',
        '!',
    ]
    cfg = CiscoConfParse(lines, factory=True)
    intf_obj = cfg.find_objects('^interface')[0]
    assert intf_obj.portchannel_number==25

def testValues_aaa_authfailmsg_delimiter_01():
    # Test auth fail-message delimiter on the same line...
    CONFIG = ['!', 'aaa authentication fail-message ^   trivial banner here ^', 'end']
    parse = CiscoConfParse(CONFIG)
    bannerobj = parse.find_objects(r'^aaa\sauthentication\sfail-message')[0]
    BANNER_LINE_NUMBER = 1
    assert bannerobj.linenum == BANNER_LINE_NUMBER
    for obj in bannerobj.children:
        assert obj.parent.linenum == BANNER_LINE_NUMBER
    assert len(bannerobj.children)==0

CONFIG = ['thing1',
        ' foo',
        '  bar',
        '   100',
        '   200',
        '   300',
        '   400',
        'thing2',]
    RESULT_CORRECT = ['thing1',
        ' foo',
        '  bar',
        '   100',
        '   200',
        '   300',
        '   400',]
    cfg = CiscoConfParse(CONFIG)
    test_result = cfg.find_all_children('^thing1')
    assert RESULT_CORRECT==test_result

]

    required_config = ['!',
    'vlan 51',
    '  name SOME-VLAN',
    '  state active',
    'vlan 52',
    '  name BLAH',
    '  state active',
    '!',]

    result_correct = ['no vlan 53', 'vlan 51', '  name SOME-VLAN', 'vlan 52', 
        '  name BLAH', '  state active']

    linespec = r'vlan\s+\S+|name\s+\S+|state.+'
    parse = CiscoConfParse(config_01)
    test_result = parse.sync_diff(required_config, linespec, linespec)
    assert result_correct==test_result

'!']

    required_config = ['!',
    'vlan 51',
    ' name SOME-VLAN',
    ' state active',
    'vlan 52',
    ' name BLAH',
    ' state active',
    '!',]

    result_correct = ['no vlan 53', 'vlan 51', ' name SOME-VLAN', 'vlan 52', 
        ' name BLAH', ' state active']

    linespec = r'vlan\s+\S+|name\s+\S+|state.+'
    parse = CiscoConfParse(config_01)
    test_result = parse.sync_diff(required_config, linespec, linespec)
    assert result_correct==test_result

def testVal_object_group_service_01():
    ## This can only be configured as protocol object-group
    conf = ['!',
        'object-group service APP01_svc',
        ' service-object tcp destination smtp',
        ' service-object tcp destination https',
        '!',]
    cfg_factory = CiscoConfParse(conf, factory=True, syntax='asa')
    obj = cfg_factory.find_objects(r'object-group\sservice')[0]
    result_correct = [L4Object(protocol='tcp', port_spec='eq 25', 
        syntax='asa'), L4Object(protocol='tcp', port_spec='eq 443', 
        syntax='asa')]
    assert (obj.name=='APP01_svc')
    assert (obj.ports==result_correct)
    assert (obj.L4Objects_are_directional is True)
    assert (obj.protocol_type=='')

def testVal_IOSIntfLine_trunk_vlan_allowed_04():
    lines = ['!',
        'interface GigabitEthernet 1/1',
        ' switchport mode trunk',
        ' switchport trunk allowed vlan all',
        ' switchport trunk allowed vlan remove 2-4094',
        ' switchport trunk native vlan 911',
        '!',
    ]
    cfg = CiscoConfParse(lines, factory=True)
    intf_obj = cfg.find_objects('^interface')[0]
    assert intf_obj.trunk_vlans_allowed.as_list==[1]

def testVal_IOSRouteLine_09():
    line = 'ip route vrf mgmtVrf 0.0.0.0 0.0.0.0 FastEthernet0/0 254 name foobarme tag 20'
    cfg = CiscoConfParse([line], factory=True)
    obj = cfg.ConfigObjs[0]
    assert 'ip'==obj.address_family
    assert 'mgmtVrf'==obj.vrf
    assert '0.0.0.0'==obj.network
    assert '0.0.0.0'==obj.netmask
    assert 0==obj.masklen
    assert 'FastEthernet0/0'==obj.next_hop_interface
    assert ''==obj.next_hop_addr
    assert obj.multicast is False
    assert ''==obj.tracking_object_name
    assert 'foobarme'==obj.route_name
    assert obj.permanent is False
    assert obj.global_next_hop is False # TODO: Figure out if False is right
    assert 254==obj.admin_distance
    assert '20'==obj.tag